Advertisement
6.22 Level adjustment
Adjust the level to avoid vibration and noise
●
Machine must be placed in a clean place ,no water ,ice and combustible materials there.
To keep vibration and noise to a minimum when the dryer is in use ,it should be placed
on a firm level surface.
If the dryer is not completely leveled ,loosen the locknuts ,adjust the adjustable feet to
●
Lower the dryer by turning right and to ascend it by turning left .Tighten the locknut after
Insuring the dryer is level.
7. Alarms
Alarm
Description
Dop
Door switch
E1
NTC sensor faulty
Possible Fault
Door is open
Harness disconnect
Wire faulty
Door lock faulty
PCB faulty
NTC sensor faulty
PCB faulty
Wire faulty
9
Action
Close the door
Connect the harness
Change wire
Change door lock
Change PCB
Change wire
Change PCB
Change wire
Hide quick links:
Advertisement
Need help?
Do you have a question about the AWD80AGP and is the answer not in the manual?
Questions and answers
Can the quick dry setting be used for full load and how much faster will the drying be?
No, the Quick Dry setting on the Whirlpool AWD80AGP cannot be used for a full load. It can only be used with the "Jeans," "Towels," and "Normal" programs and cannot be selected at the same time as the Half Load option. The exact time saved with the Quick Dry setting is not specified.
This answer is automatically generated