At+Dsctime Server Connection Timeout; 14At+Dtuall? Get Parameters; Remote Parameter Configuration; Introduction - Ebyte E840-DTU User Manual

AT+RELINKTIME?
+RELINKTIME: 20
OK
AT+RELINKTIME=30
OK
Configuration: AT+RELINKTIME=5
3.2.13 AT+DSCTIME Server Connection Timeout
Note: This timeout includes:
When transceiver and GPRS are on, the transceiver will restart if the connection to the server is not successful over 120S(default).
l
When connection is off, the transceiver will restart if the connection to the server is not successful over 120S(default).
l
AT+DSCTIME=?
+DSCTIME: (40-600)
OK
parameter: 40S-600S
For example:
AT+DSCTIME?
+DSCTIME: 120
OK
AT+DSCTIME=40
OK configuration(default): AT+RELINKTIME=120
3.2.14AT+DTUALL? Get Parameters
AT+DTUALL?
Return: OK
For example:
Checkout: AT+DTUALL?
Return:
+DSCADDR: 0,"TCP","www.cdebyte.com",80
+DSCADDR: 1,"TCP", "www.cdebyte.com",80
+DTUID:0,0,31654646494688
+KEEPALIVE:10,0,3000,5,0,cdebyte
+RELINKTIME:5
+DSCTIME: 120
+UARTCFG:115200,1,0,0
+DEBUGMODE:1
+DTUFILTER:1
+CSTT:CMNET,,

4. Remote Parameter Configuration

4.1 Introduction

All the following commands should be in capital letters instead of small letters or both of them.
l
When configuration and checkout are sent to the transceiver, the transceiver will return corresponding message automatically.
l
Once the configuration is done, it is saved automatically.
l
Message requests won't be saved in case that junk and configuration requests take up all the storage.
l
Remote here means message and TCP/UDP server.
l
14