Assembly - Makita EB7660TH Instruction Manual

ASSEMBLY

CAUTION:
Before performing any work on the blower, always
stop the engine and pull the spark plug cap off the spark plug.
CAUTION:
Start the blower only after having assembled it
completely.
CAUTION:
Always wear protective gloves.
Assembling blower pipes
1.
the hose band.
2
1. Swivel pipe 2. Flexible pipe 3. Hose band
2. Loosen and remove the clamp screw.
1. Clamp screw
3. Install the control handle / handle assembly onto the swivel pipe
and tighten them with the clamp screw.
1. Control handle / handle assembly 2. Clamp screw
4.
For tube throttle model:
control cable onto the cable holder, and close the cable holder.
3
1
1
1
2
1
1. Elbow 2. Cable holder 3. Hose band
1. Cable holder 2. Control cable
For hip throttle model:
5. Attach the long/short pipe to the swivel pipe. Turn the long/short
pipe clockwise to lock it into place. Then attach the blower nozzle with
the long/short pipe. Turn the blower nozzle clockwise to lock it into
place.
1
1. Long/short pipe 2. Blower nozzle
6. Make sure all clamps are tight.
7 ENGLISH
3
2
1
2
2