Two-Sided Original Transmission Function - Sharp AR-FX9 Operation Manual

HOW TO USE THE FAX FUNCTION

TWO-SIDED ORIGINAL TRANSMISSION FUNCTION

(AR-168D only)
The RSPF can be used to automatically fax a two-sided original. If desired, the back of the original can be rotated
180° before transmission.
• The original must be placed in the RSPF when using the two-sided original transmission function. The
Note
document glass cannot be used.
• The two-sided original transmission function cannot be used in direct transmission mode.
• The two-sided original transmission function cannot be selected when direct transmission mode is selected.
Likewise, direct transmission mode cannot be selected when the two-sided original transmission function is
selected.
Follow these steps to fax a two-sided original:
1
Place the original(s) in the RSPF.
(p.52)
Original face up
2
Press the [2-SIDED TX] key until the
desired setting appears.
SPEED/ BROAD- RECEPTION REDIAL/
MEMORY
SEARCH CAST MODE PAUSE
COVER
RESOLU-
SHEET
TION CONTRAST REPORT 2-SIDED TX
LINE STATUS SPEAKER
3
Press the [ENTER] key.
58
If you wish to rotate the
back of the original 180°,
select "ON (ROTATE)".
The selections are as
follows:
OFF
ON (ROTATE)
ON (NON-ROTATE)