Making Copies; Normal Copying - Sharp AR-F152 Operation Manual

MAKING COPIES

This chapter describes basic copying functions and some other copying functions using the
bypass tray.

NORMAL COPYING

2
This copier has two document input stations - a single pass feeder (SPF) for automatic document
feeding and an original table for manual handling of documents. The SPF is designed to hold up
to 30 originals measuring from 5-1/2" x 8-1/2" to 10" x 14" and weighing from 14 to 23 lbs.
Ensure that paper of the desired size is set in the paper tray. See page 10, LOADING
COPY PAPER. When copying onto paper larger than 8-1/2" x 11" size, pull out the
paper output tray extension. Use the tray select (
tray.
Turn the power switch on.
The ready (
G
The copier will enter a power save mode once the set time has elapsed without
any copier operation after the last copy of a run is made or power is turned
on.
The settings of the power save modes can be modified. See page 21, USER
PROGRAMS.
G
The copier will return to the initial settings a preset amount of time after the
last copy is made. The preset amount of time (auto clear time) can be changed.
See page 21, USER PROGRAMS.
12
) indicator will light up.
) key to select the desired paper