Motorola 56F8346 User Manual page 18

• CAN bypass and bus termination [J6 and JG11]
• Peripheral Daughter Card Expansion Connector, to allow the user to connect his
own SCI, SPI or GPIO compatible peripheral to the hybrid controller[J1]
• Memory Daughter Card Expansion Connector, to allow the user to connect his own
memory or memory device to the hybrid controller [J2]
• Connector to allow the user to connect his own SCI #0 / MPIO-compatible
peripheral [J16]
• Connector to allow the user to connect his own SCI #1 / MPIO-compatible
peripheral [J17]
• Connector to allow the user to connect his own SPI #0 / MPIO-compatible
peripheral [J14]
• Connector to allow the user to connect his own SPI #1 / MPIO-compatible
peripheral [J15]
• Connector to allow the user to connect his own PWMA-compatible peripheral
[J10]
• Connector to allow the user to connect his own PWMB-compatible peripheral [J11]
• Connector to allow the user to connect his own CAN physical layer peripheral
[J21]
• Connector to allow the user to connect his own Timer A / Encoder #0-compatible
peripheral [J18]
• Connector to allow the user to connect his own Timer C-compatible peripheral
[J19]
• Connector to allow the user to connect his own Timer D-compatible peripheral
[J20]
• Connector to allow the user to attach his own A/D port A-compatible peripheral
[J12]
• Connector to allow the user to attach his own A/D port B-compatible peripheral
[J13]
• On-board power regulation from an external +12V DC-supplied power input [P3]
• Light Emitting Diode (LED) power indicator [LED13]
• Six on-board real-time user debugging LEDs [LED1-6]
• Six on-board Port A PWM monitoring LEDs [LED7-12]
• Internal/External (EXTBOOT) Boot MODE selector [JG3]
• Address Range (EMI_MODE) Boot MODE selector [JG4]
2-2
Freescale Semiconductor, Inc.
56F8346EVM User Manual
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA