If An Original Misfeed Occurs While Using The Spf - Sharp AL-2030 Operation Manual

IF AN ORIGINAL MISFEED OCCURS WHILE USING
THE SPF
If a misfeed occurs in the machine when the SPF is used, the SPF will automatically
stop scanning. Manually remove the misfed original. You can check the number of
originals that must be returned to the document feeder tray in the display on the
operation panel. Follow the steps below to display the number of originals to be
returned.
The following procedure omits removal of the misfeed. Be sure to
remove the misfeed before displaying the number of originals to be
returned. For the misfeed removal procedure, see "MISFEED
REMOVAL" (p.63).
1
When an original misfeed occurs, the
SPF stops and the ZOOM indicator
blinks.
The remaining number of sets will blink in the
display.
2
Remove any originals that have not yet
been scanned from the document
feeder tray.
3
Press the copy ratio display (%) key.
The originals that were being scanned in the
SPF will be discharged and the number of
original sheets to be returned will blink in the
display.
Place the displayed number of original sheets
back in the document feeder tray together with
the original sheets removed in step 2.
If "SPF automatic original discharge time" is enabled in the user
programs, the originals in the SPF will be automatically discharged after
the set time elapses. ("USER PROGRAMS" (p.55))
68
Display of number of original
sheets to be returned