Simrad TP10 Service Manual page 37

Issue 4.0 19/09/03
FOR THE ATTENTION OF THE SERVICE MANAGER
NUMBER
PRODUCT
SUBJECT
DATE
The 20 Toothed Pulley Part No. E02839 is a push fit onto the motor drive shaft,
see sketch below, and the bonding is enhanced with Loctite 270 Part No.
260025. Instances have occurred where the bonding has weakened resulting in
reduced drive efficiency or operational failure. An improved bonding adhesive
Loctite 638 Part No. 260063 has been identified and approved for use. All
Tillerpilot repairs should be carried out using the new adhesive.
The new bonding agent has been used in the manufacture of all Tillerpilots with
the alphabetic prefix PC, 1 March 1999, and subsequent serial numbers. The
Product Support Department should be informed of any units found to be
slipping post production date 1 March 1999.
Technical Note
: PS 140
: Tillerpilot – TP100 / TP200CX /
TP300C / TP300CX / TP10 / TP20 /
TP30
: Improved bonding of drive pulley
to motor drive shaft.
: 1 October 1999
SIMRAD
37