Advertisement
ENGLISH
(Original instructions)
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance on the tool:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com
10
Technical data
,
CS1250
CS1250L
Input voltage
V
Ac
Power input
W
No-load speed
-1
Min
Max. depth of cut
mm
Blade diameter
mm
Blade bore
mm
Blade tip width
mm
Weight
kg
Level of sound pressure according to EN 60745:
Sound pressure (L
) 91.0, uncertainty (K) 3 dB(A)
pA
Sound power (L
) 102.0 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a
) 3.6 m/s
, uncertainty (K) 1.5 m/s
(cutting wood)
2
2
h,w
EC declaration of conformity
MACHINERY DIRECTIVE
%
220-240
1250
5300
66
CS1250, CS1250L - Circular saw
190
16
Black & Decker declares that these products described under
1.9
"technical data" are in compliance with:
3.4
2006/42/EC, EN60745-1:2010, EN60745-2-5:2010
These products also comply with Directive 2014/30/EU
and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
Black & Decker.
Black & Decker Europe, 210 Bath Road, Slough,
(Original instructions)
Guarantee
Black & Decker is confident of the quality of its products
and offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with Black&Decker Terms and Conditions and you will need to
submit proof of purchase to the seller or an authorised repair
agent.
Terms and conditions of the Black&Decker 2 year guarantee
and the location of your nearest authorised repair agent
can be obtained on the Internet at www.2helpU.com, or by
contacting your local Black & Decker office at the address
indicated in this manual.
Please visit our website www.blackanddecker.co.uk to register
your new Black & Decker product and receive updates on new
products and special offers.
R. Laverick
Engineering Manager
Berkshire, SL1 3YD
United Kingdom
15/06/2016
ENGLISH
11
Advertisement
