Primo Water Kamado Assembly Instructions

Primo Kamado Grill Assembly Instructions
IMPORTANT: DO NOT LIFT GRILL BY THE HINGE WHEN INSERTING INTO CRADLE
1
When the Primo
Kamado Grill
arrives, select a
level area with plenty of
working space such as a
driveway or parking lot.
3
Remove the two
side tables and
set them aside.
Remove the two "Z"
shaped cardboard
inserts and discard.
5
Open the grill and
remove the ash
tool, grate lifter,
owners manual and
the cradle hardware
package.
7
Insert the Phillips
head screw
through the two
bottom bars. Use a
locking washer, then nut.
Tighten with wrench.
9
Align the metal
crossmember bar
with the holes and
use the remaining flat
head screws and nuts.
Tighten with wrench.
Two Adults are Needed to Assemble the Grill.
Tools Needed: Box Cutter, Phillips Screwdriver, 7/16" Wrench.
2
Open the top of
the box, remove
the two main
cradle parts and set
them aside. Note: one
has a notched top bar.
4
Use a box cutter
and cut vertically
down one of the
corners. Firmly pull away
the four cardboard sides
and discard.
6
Insert the cradle
part with the
notched top bar
horizontally then turn
upright to form an "X"
shape and align holes.
8
Insert a flat head
screw into the two
top bars. Use a
locking washer and one
of the nuts. Tighten with
wrench.
10
Align the
cradle with the
grill. Make sure
the locking casters are
locked and the furthest
from the grill.