1. Manuals
  2. Brands
  3. jobmate Manuals
  4. Sander
  5. JM200FS
  6. Safety and operating manual

jobmate JM200FS Safety And Operating Manual

200w 1/3 sheet sander
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SAFETY AND OPERATING MANUAL
200W
1/3 SHEET SANDER
JM200FS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JM200FS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for jobmate JM200FS

Summary of Contents for jobmate JM200FS

  • Page 1 SAFETY AND OPERATING MANUAL 200W 1/3 SHEET SANDER JM200FS...

  • Page 3: General Power Tool Safety Warnings

    GENERAL POWER TOOL 3. Personal safety a) Stay alert, watch what you are doing and SAFETY WARNINGS use common sense when operating a power tool. Do not use a power tool while you are WARNING! Read all safety warnings and all tired or under the influence of drugs, alcohol instructions.
  • Page 4 SYMBOLS children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are To reduce the risk of injury, user must dangerous in the hands of untrained users. read instruction manual e) Maintain power tools.

  • Page 5: Component List

    COMPONENT LIST 1. On/off switch 2. Dust collection box 3. Dust outlet 4. Sanding paper clamp 5. Base plate Not all the accessories illustrated or described are included in standard delivery.

  • Page 6: Technical Data

    ACCESSORIES Dust box Sanding paper (80grit) We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. TECHNICAL DATA Type PFS200G(PFS- designation of machinery, representative of Finishing Sander ) Voltage 220-240V ~ 50Hz...

  • Page 7: Operating Instructions

    OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The machine is intended for dry sanding of wood, plastic, filler and coated surfaces. Fig.A 1. FITTING THE SANDING PAPER SANDING PAPER WITH HOOK & LOOP SYSTEM FIT THE SANDING PAPER (See Fig A) The sanding papers are placed directly onto the base plate.
  • Page 8 Fig.D A) ATTACH THE DUST BOX Your sander is equipped with a Dust Collection Box (2), which is designed for collect dust task. Insert the Dust Collection Box into the rear dust outlet of sander. Then pull the Dust Collection Box and make sure it is tightened securely on the dust outlet.

  • Page 9: Maintenance

    MAINTENANCE to remain in the same position otherwise you will remove material and create an uneven surface. Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. 8.SELECT THE RIGHT SAND PAPER Your power tool requires no additional lubrication or Selecting the correct grit of sandpaper is an maintenance.

  • Page 10: Warranty

    WARRANTY This product is warranted for a 2-year period for home domestic use from the date of the original purchase. If found to be defective in materials or workmanship, the tool or the offending faulty component will be replaced free of charge with another of the same item.

Table of Contents