1. Manuals
  2. Brands
  3. jobmate Manuals
  4. Sander
  5. JM1400CP
  6. Safety and operating manual

jobmate JM1400CP Safety And Operating Manual

1400w/180mm car polisher
Hide thumbs
Table of Contents

Advertisement

Quick Links

SAFETY AND OPERATING MANUAL
1400W/180mm
CAR POLISHER
JM1400CP

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JM1400CP and is the answer not in the manual?

Questions and answers

Related Manuals for jobmate JM1400CP

Summary of Contents for jobmate JM1400CP

  • Page 1 SAFETY AND OPERATING MANUAL 1400W/180mm CAR POLISHER JM1400CP...

  • Page 2: General Power Tool Safety Warnings

    GENERAL POWER TOOL (RCD) protected supply. Use of an RCD reduces the risk of electric shock. SAFETY WARNINGS 3. PERSONAL SAFETY WARNING! Read all safety warnings and all a) Stay alert, watch what you are doing and instructions. Failure to follow the warnings use common sense when operating a power and instructions may result in electric shock, fire tool.
  • Page 3 SYMBOLS before making any adjustments, changing accessories, or storing power tools. Such To reduce the risk of injury, user must preventive safety measures reduce the risk of read instruction manual starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar Double insulation with the power tool or these instructions...

  • Page 4: Component List

    COMPONENT LIST 1. On/off switch 2. Lock-on switch 3. Locking button of rotatable handle 4. Polish bonnet 5. Foam disc 6. Spindle lock button 7. Front handle 8. Brush cover 9. Variable speed control 10. Soft painted handle 11. Sanding paper (See Fig. C) *Not all the accessories illustrated or described are included in standard delivery.

  • Page 5: Technical Data

    ACCESSORIES Hex key Front handle Velcro sanding sheet (Foam disc) Polish bonnet Sanding paper We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. TECHNICAL DATA Rated voltage 230-240 V ~ 50 Hz...

  • Page 6: Operation Instructions

    OPERATION INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. 1. PLACE THE BONNET (SEE FIG.A) Place the required bonnet securely over the sponge pad and make sure it’s centrosymmetric, otherwise the polisher vibrates badly. Fig. A 2. SPREAD THE POLISH (SEE FIG.B) Spread about a tablespoonful of polish evenly over the entire surface of the pad cover.
  • Page 7 6. HAND GRIP AREAS (SEE FIG. F) Always hold your car polisher firmly with both hands when operating. 7. INSTALLING THE FRONT HANDLE (SEE FIG. G1,G2) For your personal safety we recommend using the front handle at all time. Tighten the screw with hex key clockwise. Tighten fully. (SEE FIG.
  • Page 8 10. USING THE TURNABLE HANDLE (SEE FIG. J) To best suit the different working positions, your car polisher is equipped with a rotatable handle. Press the rear of the locking button (3) on the rotatable handle and you can rotate the handle 90° to left or right. Then release the locking button.

  • Page 9: Maintenance

    MAINTENANCE Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth.

Table of Contents