Sanding pad style: Hook & loop Sanding pad shape: Delta 5½” x 3¾” (133 x 95 mm) Sanding pad size: Sanding pad weight: 2 lb. 8 oz. (1.13 kg) TOLL FREE HELPLINE 1-866-JOBMATE Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8...
GENERAL SAFETY WARNINGS CAUTION: Before using this tool or any of its accessories, read this manual and follow all Safety Rules and Operating Instructions. This instruction manual includes the following: General Safety Rules Specific Safety Rules and Symbols ...
GENERAL SAFETY WARNINGS ALWAYS WEAR A DUST MASK DESIGNED FOR USE WHEN OPERATING A POWER TOOL IN A DUSTY ENVIRONMENT. WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: ...
POWER TOOL SAFETY GENERAL SAFETY RULES Avoid body contact with grounded surfaces such as pipes, radiators, ranges and WARNING: Read and understand refrigerators. There is increased risk of all instructions. Failure to follow all electric shock if your body is grounded. instructions listed below may result in electric shock, fire and/or serious personal Do not expose power tools to rain or wet...
POWER TOOL SAFETY PERSONAL SAFETY – cont’d Disconnect the plug from the power source before making any adjustments, changing Avoid accidental starting. Be sure the accessories or storing the tool. Such switch is OFF before plugging in. Carrying preventive safety measures reduce the risk tools with your finger on the switch or of starting the tool accidentally.
SPECIFIC SAFETY RULES WARNING: For your safety, do not workpiece, tools or any other obstructions plug in your detail sander until you while you are working with the power tool. have read and understood this Owner’s Manual. Make sure any extension cord used with this tool is in good condition.
SYMBOLS WARNING: Some of the symbols below may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. direct current volts no load speed amperes alternating or direct current...
ACCESSORIES & CARTON CONTENTS AVAILABLE ACCESSORIES CARTON CONTENTS WARNING: Use only sandpaper Carefully unpack the detail sander. Compare against the “Detail Sander recommended for this detail sander. Components” chart below. Follow instructions that accompany the sandpaper. Improper use of sandpaper NOTE: See illustration of components may cause injury to the operator or below.
ASSEMBLY AND OPERATION INSTALLING SANDPAPER Firmly press the sandpaper (1) onto the hook & loop pad (2) (Fig. 1). NOTES: a) Place sandpaper on the hook & loop pad so the holes in the sandpaper line up with the matching holes in the hook pad. b) Press sandpaper firmly onto the hook pad so hook &...
ASSEMBLY AND OPERATION ON / OFF SWITCH To turn the detail sander ON, press the left side of the ON/OFF switch (1) (Fig. 4). To turn the sander OFF, press the right side of the ON/Off switch (2). WARNING: Always wear safety goggles or safety glasses with side shields when operating your detail sander.
ASSEMBLY AND OPERATION SANDPAPER SELECTION Make sure you select the correct size and style of sandpaper for your detail sander. The correct sandpaper will: Be the same size, shape and have holes that match the hook pad Have a loop backing. Selecting the correct grit and type of sandpaper is extremely important in achieving a high quality sanded finish.
ASSEMBLY AND OPERATION WARNING: Always hold the detail sander in the palm of one hand using the hand grip on the top of the detail sander. Never cover the cooling vents with your hand or the motor may overheat. WARNING: Your detail sander should only be turned ON when the entire surface of the sandpaper pad is...
or plaster. During any use on these MAINTENANCE materials it is extremely important that the tool is cleaned frequently by blowing out WARNING: When servicing, use with an air jet. only identical replacement parts. Use of WARNING: any other part may create a hazard or Always wear safety cause product damage.
PARTS LIST – MODEL 054-7236-0 When servicing, use only JobMate™ replacement parts. Use of any WARNING: other parts may create a safety hazard or cause damage to the tool. Any attempt to repair or replace electrical parts on this power tool may create a safety hazard unless repair is performed by a qualified technician.
1-year Warranty This JobMate product carries a one (1) year warranty against defects in workmanship and materials. Trileaf Distribution agrees to replace the defective product free of charge with the same model or one of equal value or specification, within the stated warranty period, when returned by the original purchaser with proof of purchase.
Need help?
Do you have a question about the 054-7236-0 and is the answer not in the manual?
Questions and answers