Cone-Fire Shorthand - Orton Sentry 2.0 Operating Instructions Manual

Appendix F:
Sentry Cone-Fire Shorthand Programming
After you press the key(s) in the left column, the message to the right will appear. Press 1from
spond, your controller does not have Cone-Fire.
KEYS TO PRESS
Apply power to kiln
1
Cone # (i.e. 05)
ENTER
1(Fast), 2 (Med.), or 3 (Slow)
ENTER
Pre-Heat time (0 if none)
ENTER
Hold time (0 if none)
ENTER
Slow cooling rate (0 if none)
ENTER
ENTER
The Kiln is now firing to the cone you selected.
32
DISPLAY
IdLE
CONE
05
SPd
FAST
PRHT
00.00
HOLD
00.00
COOL
0000
IdLE
STRT
. If the 1key does not re-
IdLE
COMMENTS
Press Enter if IdLE doesn't appear.
Enter the cone number
Enter the firing speed.
The firing speed appears.
Enter Pre-heat time.
Pre-heat time appears.
Enter hold time.
Hold time appears.
Enter slow cooling rate.
Shows degrees per hour.
Kiln is ready to fire.
Kiln is now firing. Press 6 for
Program Review.
.