Switch On/Off; Photograph & Video-Record - KanDao Obsidian Go User's Product Manual

2.3 Switch on/off

Power on: Shortly press the [power button], if the camera
is turned on normally, the power lamp will keep red, and
the six [working mode lamps] will keep blue.
Shortly press [power button]
to switch on camera
Power off: Long press [power button] all indictor lamps
will be off when the camera is powered off.
2.4 Photograph & Video-record
Photograph: Shortly press the
Shortly press the [time-lapse
[Time-lapse button] to
button] to capture photo
capture a photo. And the
capture mode is 10-second
time-lapse, shortly press [the
time-lapse] again to end the
capture. During the capture,
the blue [working mode
lamps] will twinkle once.
Video-record: Shortly press the
Shortly press the [camcorder
[camcorder button] to record
button] for record video
video. Shortly press the button
again to stop recording.All
[working mode lamps] will be in
quick flashes for about 4
seconds, before the recording
starts. During the recording
process, [working mode lamps]
will flash slowly.
Notice: If camera has no TF-card / memory full /
abnormal working status, the [working mode lamps]
will flash quickly. During recording, the flash is slower.