Sennheiser Tourguide Wireless Transmitter SR 2020 D Instruction Manual page 19

Sennheiser tourguide wireless transmitter instruction manual
Table of Contents

Advertisement

Transmitting several
languages simultaneously
Setting a channel ("Channel")
To set a certain channel, proceed as follows:
1. Make sure that the transmitter and the receivers are set to
the
same
channel mode ("Tourguide" or "Conference"),
otherwise no connection can be established (see page 18).
2. Set the SR 2020 D transmitter to the desired channel (see
next section).
3. Set one of the receivers to the same channel.
4. Automatically set all other receivers to the same channel
using the channel copy function (for information on the
channel copy function, please refer to the instruction manual
of the Tourguide 2020 system).
To set the transmitter to the desired channel:
Select the "Channel" menu.
"Channel" appears on the display and the current channel is
shown.
Press the
/
rocker button
Press the
SET
button
In order to be able to transmit several languages
simultaneously, you require one SR 2020 D transmitter and one
or several receivers per language:
Set the transmitter and the receivers assigned to certain
language to the same channel.
Do not use this channel for any other language.
Displaying the frequency of the selected channel
("Frequency")
You can display the frequency of the selected channel. This
function is useful, if you are using other Tourguide systems in
the vicinity which interfere with your transmission (see previous
section).
Operating the SR 2020 D
to change the channel.
to store the selected channel.
17

Advertisement

Table of Contents
loading

Table of Contents