Connecting To Tv; Via Digital Optical Audio S/Pdif; Via 3.5Mm Audio Cable - JBL Soundgear BTA Quick Start Manuals

Soundgear BTA
4

Connecting to TV

STEP
1
2

1. Via digital optical audio S/PDIF

a. Remove the protective caps
b. Connect TV to BTA
INPUT
OPTICAL
Note: Please make sure that your audio output settings on your TV, DVR,
or other relevant device are set to PCM. The volume of optical output is
typically fixed and TV speakers can be controlled independently as
necessary. Lower the TV volume or mute TV speaker is highly
recommended.
c. Switch to S/PDIF

2. Via 3.5mm audio cable

a. Connect TV to BTA
INPUT
3.5mm
S/PDIF (Optical) AUX (3.5mm audio)
S/PDIF AUX
ü
S/PDIF AUX
ü
SPDIF AUX
OUTPUT
OPTICAL
COAXIAL
AUDIO