Overview; Battery - Baracoda IDBlue User Manual

All manuals and user guides at all-guides.com

Overview

1.
You can use the tip as a stylus with your PDA, TabletPC or other touch screens.

Battery

2.
Recharge the internal battery by using the included AC adapter. The Adapter rating is 9V, 1A.
When the scanner is charging, the LED is red (solid).
When the scanner is fully charged, the LED is off.
Before the initial use, the device must be charged for at least 4 hours. After, a full recharge (from completely
drained batteries) takes approximately 1-2.5 hours.
An alternation of red and green blinking on the two LEDs indicates that the battery level is low. Recharge
battery immediately.
When the original batteries wear out, please contact your Baracoda reseller for replacements.
Baracoda IDBlue – User Guide v2.4.2
Data Capture
for Workforce
in Motion
- 5 -