Table of Contents
Advertisement
will need a paperclip or similar object to push the button.
3.
Make sure the device is powered on.
4.
Locate the master reset button on the left of the device.
5.
Insert a paperclip into the hole and hold the button down for three
seconds until the green LED goes off and then blinks.
Your list of wireless network will now show the original default network
when you first configured your device.
6.
Connect to the device again and reconfigure it using the Initial Setup
Wizard.
5.4.6 Using the WLAN
The WLAN section contains details of the Wireless LAN, also called Wi-Fi
network or an 802.11 network.
5.
15
Advertisement
Table of Contents
