Usage Of Child Lock; Salt Indicator; Rinse Aid Indicator; Rinse Aid Indicator Setting - Beko D 5001 E Instruction Manual

If you want to select a new delayed
start time while the delayed start
countdown is in progress, then pause
the machine by pressing the Start /
Pause / Cancel button (7). Set the
desired time by pressing the Delayed
Start Button (8). Start the countdown
for the new time by pressing the Start /
Pause / Cancel button (7) again.

Usage of Child Lock

Press the Child Lock buttons ((3) and
(4) simultaneously for three seconds
in order to activate the child lock. Child
lock indicator (16) will appear on the
screen. Repeat the same procedure
to disable the child lock. Child lock
does not lock the door of the machine
but it prevents the selected program
or functions from being changed and
disables the Start / Pause / Cancel
button (2).

Salt Indicator

Please check the salt indicator (17)
on the display to see whether there is
enough softening salt in your machine
or not. You need to refill the powder
dispenser whenever the salt warning
indicator light lights.
WARNING:
If the water hardness level is stored
as (r1), salt indicator will never come
on even if the salt container is empty.
(Adjusting the water hardness level is
explained in Water Softening System
section.)

Rinse Aid Indicator

Check the rinse aid warning display
(18) on the screen to find out if there
is sufficient amount of rinse aid in your
machine. You must refill the rinse aid
container when the rinse aid indicator
comes on.
WARNING:
If the Rinse Aid Indicator is set to
(OFF), rinse aid indicator will never
come on even if the rinse aid container
is empty.

Rinse Aid Indicator Setting

•
When your machine is switched
off, press Half Load (
(4) and then On / Off button (1) to
switch it on.
•
Hold Half Load (
pressed and release On / Off
button (1).
•
Keep Half Load (
pressed for three seconds more.
•
Rinse Aid Indicator (18) comes on
and the stored rinse aid indicator
status of your machine appears on
the display in the format of "ON" or
"OFF".
•
You can change the status of the
indicator as "ON" or "OFF" with
Start / Pause / Cancel button (7).
If you switch off the machine with
"On/Off" button (1) when the status
is "ON", then the rinse aid indicator
will come on when the rinse aid
level in your machine becomes
low while the machine is in use.
If you switch off the machine
with "On/Off" button (1) when the
status is "OFF", then the rinse aid
indicator will never come on.
25 GB
) button
) button (4)
) button (4)