Hoover AXI HDPN 2L350OW Manual page 7

Hydraulic safety devices
These dishwashers are also equipped
with an anti-overflow safety device
which, if water exceeds normal levels
due to malfunctions, automatically
blocks water flow
excess quantities.
Some models may include one or more of
the following features:
WATERBLOCK (fig. 3)
The waterblock system has been designed
to improve the safety of your appliance. The
waterblock system actually prevents flooding
which might be caused by a machine
malfunction or as a result of a fracture on
the pipes.
How does waterblock work
Sump located in the base of the appliance
collects any possible water leakage and
operates a sensor which subsequently
activates a valve placed under the water tap
and stops any water from the supply even
with the tap fully opened. If the box "A"
containing the electrical parts is damaged,
remove the plug
immediately. To ensure perfect operation of
the safety system, box "A" with the hose,
should be connected to the tap as shown in
figure. The inlet hose should not be cut, as
it contains parts under load. If the hose is
not long enough for correct connection, it
must be replaced with a longer one. The hose
can be obtained from your Service Agent.
3
and/or drains
from the socket
A
l
AQUASTOP (fig. 4):
A device located on the supply tube that
stops water flow if the tube deteriorates;
in this case, a red mark will appear in the
window "A" and the tube must be
replaced. To unscrew the nut, press the
one-way lock device "B".
4
A
l
AQUAPROTECT - SUPPLY TUBE WITH
GUARD (fig. 5):
Should water leak from the primary
internal tube
containment sheath "B" will contain water
to permit the washing cycle to complete.
At the end of the cycle, contact the
Customer Service Centre to replace the
supply tube.
5
A
7
B
"A", the transparent
B