Heath Zenith notifi alert Owner's Manual page 5

Setup
3
Test the Notifi Alert Push Button and Chime
IMPORTANT: Do not permanently mount the push button until the push button and chime are working properly.
1. Temporarily position the push button where it will be mounted.
2. Press the push button to verify the chime and push button work correctly.
3. If the chime does not sound, move the chime closer to the push button and test again.
4
Install the Notifi Alert Push Button
1. Secure the push button backplate to the door jamb or wall with screws or double-sided tape.
2. Slide the top of the Notifi Alert push button cover down onto the backplate and press the bottom of the push button cover
against the backplate until it snaps onto the backplate.
SCREW INSTALL
Remove material in screw holes (if needed)
before mounting with screws.
Push Button
Cover
DOUBLE-SIDED TAPE INSTALL
Push Button
Backplate
5