Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for LEXIN LX-R6
Summary of Contents for LEXIN LX-R6
-
Page 2: Table Of Contents
Table of Contents 1.Introduction...................1 2.Package Contents...............2-3 3.Installation Instructions............3-4 4.General Operation Instructions..........5 - Powering On/Off and Charging - Pairing LX-R6 with a Bluetooth Device 5.Controls and Functions............6-9 6.Maintenance and Care..............9 7.Certification and Safety Approvals........9-10 8.Warranty..................10 9.Waiver and General Release..........10-11... -
Page 3: Introduction
Bluetooth wireless helmet headsets, designed for installation into most open-face, flip-front and full-face style helmets. With the LX-R6, you can call hands-free on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and... -
Page 4: Package Contents
How it Works 2. Package Contents... -
Page 5: Installation Instructions
• LX-R6 Main Unit •Slim 5mm Hi-Fi Stereo Speaker •Boom Microphone for both full-face and half-face style helmet • Mounting Bracket & Clamp& 3M Tape • USB Cable • 3.5mm Audio Cable • User Manual 3. Installation Instructions 3.1 Insert the back plate of the clamp between the internal padding and external shell of the helmet, then attach the front bracket in the proper position on the left bottom edge of the helmet and tighten the clamp with the supplied screws. - Page 6 3.3 Place the speakers into the cheek pads. Push the speakers and microphone firmly against the Velcro pads. 3.4 Push the wires into the gap between the helmet liner and shell. 3.5 Mount the LX-R6 main unit on the bracket. 3.6 Plug the headset into the main unit.
-
Page 7: General Operation Instructions
It takes about 2.5 hours to be completely charged. 4B. Pairing the LX-R6 with a Bluetooth Device Before using the LX-R6 Bluetooth headset with any of Bluetooth devices for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth audio devices such as MP3 or GPS, and with other LX-R6 Bluetooth headsets. -
Page 8: Controls And Functions
5.3 Bluetooth Intercom Talk 5.3.1 Pairing with the other LX-R6 headsets for Intercom Conversation The LX-R6 can be paired with up to five other headsets for a large group Bluetooth Intercom conversation. 1) Pairing two LX-R6 headsets to talk 1.Start with power off status, press and hold Power Button on both headsets for 6... - Page 9 D, C and E, C and F, then the headset D and E, D and F, then the headset E and F by following the same procedure as above. Note: 1.If you have purchased LX-R6 Dual Pack, the 2 units are pre-paired already, you can simply press the power button to initiate or quit the intercom talking with the other.
- Page 10 Bluetooth Audio Device Pairing instructions described in the previous chapter. The LX-R6 supports the Advanced Audio Distribution Profile (A2DP), so if your Bluetooth audio device also supports the A2DP, you can use the LX-R6 to remotely control music playback. You may not only adjust the volume but also use the functions such as play &...
-
Page 11: Maintenance And Care
5.6 Reset When the LX-R6 is not working properly or is in faulty status with any reason, you may reset by by charging the main unit when it is working. The LX-R6 will be switched off and you have to turn on and try to use again. -
Page 12: Warranty
Customer agrees to insure the Product or assume the risk of loss or damage in transit, to prepay shipping charges to LEXIN, and to use the original shipping container or equivalent. - Page 13 You hereby assume all risks and dangers and all responsibility for any losses and/ or damages, whether caused in whole or in part by the negligence or other conduct of others, including LEXIN. 9.5. By using the Product, you confirm that you have read this release of liability and fully understand and accept its terms and conditions.
- Page 14 WWW.LEXINMOTORCYCLE.COM tech@lexinmotorcycle.com +1 (800) 380-8248...