Table of Contents 1.Introduction...................1 2.Package Contents................2 3.Installation Instructions............3-4 4.General Operation Instructions..........5-6 - Powering On/Off and Charging - Pairing LX-B2 with a Bluetooth Device 5.Controls and Functions............6-7 6.Maintenance and Care..............7 7.Certification and Safety Approvals..........8 8.Warranty..................8-9 9.Waiver and General Release............9...
Bluetooth wireless helmet headsets, designed for installation into most open-face, flip-front and full-face style helmets. With the LX-B2, you can call hands-free on your Bluetooth mobile phone, listen to stereo music or voice instructions for GPS navigation via Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger.
2. Package Contents • LX-B2 Main Unit • Hifi-Speaker with Boom Microphone for Open Face Helmet or Full Face Helmet • USB Cable • Mounting Bracket & Headset • User Manual...
3. Installation Instructions 3.1 If using the spring clip, attach the clip to the bracket by inserting the ends of the clips into the holes in the cradle. Once the clip is securely attached to the bracket, slide the clip between the outer shell and EPS padding of the helmet along the left side where desired.
Page 6
Button Microphone for Boom Microphone for Full Face Helmet Open Face Helmet 3.3 Place the speakers in the speaker pockets behind the helmet comfort liner, using the Velcro included to secure them in place. The speakers should fit close to the ear when the helmet is on.
4B. Pairing the LX-B2 with a Bluetooth Device Before using the LX-B2 Bluetooth headset with any Bluetooth devices for the first time, the pairing process must be performed. The LX-B2 can be paired with Bluetooth mobile phones, Bluetooth audio devices such as GPS, and with other LX-B2 Bluetooth headsets.
5.3 Bluetooth Intercom Talk 5.3.1 Pairing with the other LX-B2 headsets for Intercom Conversation The LX-B2 can be paired with the other headsets for a rider to passenger or bike to bike Bluetooth Intercom conversation. 1. Take out the two headsets (A and B) that you would like to pair with each other.
6. Maintenance and Care The LX-B2 should be treated with care and the following suggestions will help maintain your Warranty. 6.1. Do not use or store the device in dusty or dirty environments. Moving parts and electronic components can be damaged.
This warranty is limited to the repair and/or replacement, at LEXIN’s discretion, of defective or non-conforming Product, and LEXIN shall not be responsible for the failure of the Product to perform specified functions, or any other non- conformance caused by or attributable to: (a) any misapplication or misuse of the Product; (b) failure of Customer to adhere to any of LEXIN’s specifications or instructions;...
Customer agrees to insure the Product or assume the risk of loss or damage in transit, to prepay shipping charges to LEXIN, and to use the original shipping container or equivalent.