Operation - Vessel STAT CLEAN G2-E Instruction Manual

 Operation
1.Nozzle
2.Trigger
3.LED for operation and
high voltage alarm
4.Hook
5.Air Tube Inlet
6.Power Supply Connector
Air Blow Point Part which ejects air. According to the application,
you can install the Tube-Fitting Nozzle (option) instead.
Pull the trigger for air blow and static electricity removal.
LED lights during static electricity removal after pulling the trigger.
H.V. ALARM LED lights at the time of high voltage abnormality.
To hang on this gun while not in use.
Air Tube connecting (Outer dia. 6mm x Inner dia. 4mm).
Power inlet fitting for attached power supply adapter (AD24-ITC-E).
8
Stopper