ASROCK G41C-GS R2.0 Installation Manual page 7

WARNING
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
the third-party overclocking tools. Overclocking may affect your system stability, or
even cause damage to the components and devices of your system. It should be
done at your own risk and expense. We are not responsible for possible damage
caused by overclocking.
CAUTION!
1. Please check the table below for the CPU FSB frequency and its
corresponding memory support frequency.
CPU FSB Frequency
1333
1066
800
533
* DDR3 1333 memory modules will operate in overclocking mode.
* When you use a FSB533-CPU on this motherboard, it will run at
DDR3 533 if you adopt a DDR3 800 memory module.
* If you adopt FSB1333-CPU and DDR3 1333 memory module on this
motherboard, you need to adjust the jumper. Please refer to page 9
for proper jumper settings.
2. Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
TM
/ Vista / XP. For Windows
limitation. In order to maximize the system memory, please install 4GB
memory module with 16 cells or 2GB memory modules with at least 8
cells.
ASRock G41C-GS R2.0 Motherboard
Memory Support Frequency
DDR3 800, DDR3 1066, DDR3 1333
DDR2 667, DDR2 800
DDR3 800, DDR3 1066
DDR2 667, DDR2 800
DDR3 800
DDR2 667, DDR2 800
DDR3 800
DDR2 533
®
OS with 64-bit CPU, there is no such
®
7
7 7 7 7 7