Table of Contents
Advertisement
Detaching the rails
Notes
The rails can be removed for cleaning.
To unhook the rails:
1.
Lift the front of the rails upwards
2.
and detach
3.
Then pull the rails forward
and take them out.
Clean the rails using either washing up liquid and a
sponge or a brush.
To hook rails back into position:
First insert the rails into the rear socket,
push them back slightly
and then hook them into the front socket.
The rails fit both the left and right sides. Recess (a)
must always be at the bottom.
Shimmering metallic discolourations on the hob: This
is caused by pan abrasion or the use of unsuitable
cleaning agents. This is difficult to remove. Try using
Hob Clean or Sidol for ceramic and steel.
Enamel in the oven is baked on at very high
temperatures. This can cause some slight colour
variation. This is normal and does not affect the
function. Do not use coarse scouring pads or strong
cleaning agents to remove such discolourations.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
Anti corrosion protection is guaranteed.
39
Advertisement
Table of Contents
