Page 1
Operating Instruction Manual For EP-100WC Compression Tool with Parts List...
Page 2
EP-100WC SPECIFICATIONS SPECIFICATIONS 100 TON COMPRESSION HEAD Output: 100 ton Weight: 96 lbs. • Designed for Full Tension Transmission and Size: 7-1/2”W x 14”H Substation Connections Die Style: HA100 Series Ram Stroke: .98” travel (24.8mm) • Double Acting Hydraulic Cylinder for Quicker...
GENERAL INFORMATION The following steps are guidelines for safe operation of the Huskie EP-100WC. Please take the time to review them as these are helpful hints that have been accumulated over the years. 1. Never operate the tool without dies or without the cap in place. Ram may be extended more than its stroke if the cap is not in place to function as a stop.
Page 6
Huskie reserves the right to determine all warranty claims. Failure due to misuse, abuse or repairs attempted by anyone other than Huskie Tools, Inc., or an authorized service center render this warranty null and void. Our patented drop-out bypass cartridge can be re-calibrated or tested at no charge for the life of the tool.
Page 7
MODEL EP-100WC WARRANTY HOW TO GET SERVICE UNDER THE TERMS OF THE LIMITED WARRANTY Return your product directly to Huskie Tools, Inc. as our representative network is not prepared to service the product under the terms of this warranty. 1. Write, call or fax Huskie stating the tool’s purchase date and problem. You will be given a RGA # to assure that your merchandise will be properly handled upon its receipt.