VOLTCRAFT IPC-1L Operating Instructions Manual page 21

1 Power input socket
2 Battery compartments
3 Number buttons
Press respective number button to select a particular battery compartment for charging
and to display the operating mode
4 "DISPLAY" button
Press "DISPLAY" button to select the displays of the charging current (in mA), time
elapsed (in hh:mm), the terminal voltage (in V) and accumulated capacities (in mAh or
Ah) during the charging or discharging process.
5 "CURRENT" button
Press "CURRENT" button to select the amount of current to be applied (within the first 8
seconds after batteries are inserted) in different operating modes.
6 "MODE" button
The "MODE" button shall first be pressed and held for about 1 second to activate
the mode change.
The subsequent pressing of the mode key will enable to toggle among the "Charge",
"Discharge", "Test" and "Refresh" mode.
7 Different display modes are shown:
displays, charging current (mA), battery voltage (V), accumulated capacities (mAh) or
time elapsed (hh:mm).
8 Different operating modes are displayed.
21