Scanning In Hands-Free Mode; Standard Product Defaults; Keyboard Country - HP Engage One 2D User Manual

Scanning in hands-free mode

When the scanner is seated in the stand the scanner's built-in sensor places the scanner in hands-free mode.
When the scanner is removed from the stand it operates in its normal hand-held mode.
1. Make sure that all cable connections are secure.
2. Insert the scanner in the stand by placing the scanner onto the stand.
3. To scan a bar code, place the bar code up to the scanner and make sure that the scan line crosses every
bar and space of the symbol.
4. Upon successful decode, the scanner beeps and the LED turns green.

Standard product defaults

The following bar code resets all standard product default settings.

Keyboard country

Scan the Program Keyboard Country bar code below, then scan the numeric bar code(s) from the
Programming chart on page
As a general rule, the following characters are not supported by the scanner for countries other than the
United States:
@ | $ # { } [ ] = / ' \ < > ~.
Country Code
Belgium
Brazil
Czechoslovakia
Denmark
Finland
France
Germany/Austria
Great Britain
Norway
2 Chapter 1 Using the scanner
Standard Product Defaults
5, and then scan the Save bar code to program the keyboard for your country.
Program Keyboard Country
Scan
1
16
15
8
2
3
4
7
9
Country Code
Italy
Japan
Latin America
Russia
Slovakia
Spain
Switzerland
USA (Default)
Scan
5
28
14
26
22
10
6
0