Accessories; Troubleshooting - Braun 5 Series Manual

Accessories

Braun recommends changing your shaver's Foil & Cutter cassette every 18 months to
maintain your shaver's maximum performance.
Available at your dealer or Braun Service Centres:
• Foil & Cutter cassette: 52S/52B
• Cleaning Cartridge: CCR
• Braun Shaver cleaner spray
Subject to change without notice.
For electric specifications, see printing on the special cord set.
Trouble-Shooting
Problem
SHAVER
Shaver does
not charge
completely and
keeps blinking.
Charging does
not start when
connected to
power socket.
Unpleasant
smell from the
shaver head.
Battery
performance
dropped
significantly.
Possible reason
Ambient temperature is
out of valid range.
1. Sometimes charging
could start delayed
(e.g. after long
storage).
2. Ambient temperature
is out of valid range.
3. Special cord set is not
plugged in properly.
1. Shaver head is cleaned
with water.
2. Cleaning cartridge is
in use for more than
8 weeks.
1. Foil and cutter are
worn which requires
more power for each
shave.
2. Shaver head is
regularly cleaned
with water but not
lubricated.
Remedy
Recommended ambient temperature for
charging is 5 °C to 35 °C (41 °F to 95 °F).
1. Wait a few minutes, if charging will
start automatically.
2. Recommended ambient temperature
for charging is 5 °C to 35 °C (41 °F to
95 °F).
3. Special cord set needs to snap into
place.
1. When cleaning the shaver head with
water only use hot water and from time
to time some liquid soap (without
abrasive substances). Remove
Foil & Cutter cassette to let it dry.
2. Change cleaning cartridge at least
every 8 weeks.
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly cleaned with
water, apply a drop of light machine oil
on top of the foil once a week for
lubrication.
13