Installing The C&C; Using The C&C; Charging The Shaver In The C&C - Braun 5 Series Manual

DANGER: FLAMMABLE. CONTENTS MAY CATCH FIRE. Do not smoke. Use only in
well-ventilated areas. Keep away from flames such as pilot light, and any object that
sparks such as electric motor. Keep locked up. KEEP OUT OF REACH OF CHILDREN.
CAUTION: MAY IRRITATE EYES. Do not get in eyes.
FIRST AID TREATMENT: Contains ethanol. If swallowed, call a Poison Control
Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for
15 minutes.
13 Station power socket
14 Lift button for cartridge exchange
15 Station-to-shaver contacts
16 Clean&Charge Station display
16a Level indicator
16b Status light
16c Cleaning program indicators
17 Start button
18 Cleaning cartridge (not with all models)
Installing the C&C
• Remove the protection foil from the C&C display.
• Press the lift button (14) at the rear side of the C&C to lift up the housing.
• Hold the cleaning cartridge (18) down on a flat, stable surface (e.g. table).
• Carefully remove the lid from the cartridge.
• Slide the cartridge from the rear side into the base of the station until it snaps into
place.
• Slowly close the housing by pushing it down until it locks.
• Using the special cord set (10a), connect the station power socket (13) to an
electrical outlet.
Using the C&C
Important: The shaver needs to be dry and free from any foam or soap residue!
Insert the shaver in the C&C upside down, with the front showing and released head
lock (3).
The contacts (7) on the back of the shaver need to align with the contacts (15) in the
C&C. Push the shaver in the correct position. A beep sound confirms that the shaver
sits properly in the C&C.
The C&C analyzes the hygiene status. The status is shown by the cleaning program
indicators (16c) in the C&C display (16).
Charging the shaver in the C&C
Charging will start automatically when the shaver has been placed in properly.
11