MallinCam HD-10 User Manual page 63

Mallincam HD-10 User Manual
Adjust the Resolution and frames/second (fps) value on Manycam/Splitcam/WebcamMax
Step 5
Note
Step 6
Minimize the Manycam/Splitcam/Webcam Max software window
Click on the little underscore on the top right side of the Manycam/Splitcam/Webcam Max window. This will
eliminate the Manycam/Splitcam/Webcam Max window from your desktop (it should now appear on the
bottom of your desktop monitor), but note that the software is still running and still has hold of your desktop
(HD-10 VIDEO Software) image location.
HD-10 User Manual
This will be trial and error; it all depends upon resolution, bandwidth, and what over
members on NSN experience from your broadcasted image. You will end up adjusting both
on the Manycam/Splitcam/Webcam Max side as well and on the NSN side to get the best
image. A helpful hint: I slide over the Manycam/ Splitcam/Webcam Max window so that
some of the text appears in the Manycam/Splitcam/Webcam Max window. Can the members
on NSN read the words? If not, adjust. Remember, this may take a couple of sessions until
you obtain the ideal resolutions for your particular setup. For me I have set Splitcam at
800x800 and NSN at HDCAM.
This allows you to select
the size and location of
the desktop that you
want on SplitCam. Just
slide and adjust the
overlay on top of your
HD-10 Software image
July 7, 2017
.
Page 60