Table of Contents
Advertisement
Mallincam HD-10 User Manual
If after making control adjustment of your image and it looks worse that when you started
(this happens as you slowly learn what controls best work for your system), you can display
click on the Default Button located on the bottom right of the Control window. The
Mallincam HD-10 will reset all of the controls back to their defaults.
Your electrical power system way cause cycle flickering of the image, if this rare case
occurs click on either the 50 Hz (Europe) or 60 Hz (North America) check boxes to see if this
improves the image. Normally 60 Hz is the default setting for our equipment.
Now that you have the image tweak to your perfection (it takes a while to
learn what controls work best for your telescope combination. You now can
either Save a snapshot or start a video recording of what is being captured.
Images and recordings are saved onto your SD data card.
To save a JPEG snapshot of whatever image is currently on your monitor, just click on the
Camera Icon. The Mallincam HD-10 will automatically save the image on the SD Card (the
image name will temporarily pop-up in the middle of the screen, such as IMG0001.JPG.
To Start a .avi (VID001.AVI) recording of the images being captured on HD-10, just click on
the Video Camera Icon. The status timer will appear and the lower right side of the image
indicating how long the video currently is. To stop the recording, just click again on the
Video Camera Icon.
You can use the Browse Images Icon (from the right side of the screen), to view or delete
the saved snapshot or video file.
HD-10 User Manual
July 7, 2017
Page 16
Advertisement
Table of Contents
