MallinCam HD-10 User Manual page 62

Mallincam HD-10 User Manual
Step 2
Double Click on the HD-10 Control Software icon.
Get the image of your object on the Image Window of the HD-10 Software, adjust the settings on the software
for your planned object and size the window so you have room for other software on your monitor real-estate.
If you have a dual Monitor system, move the HD-10 Software to the second monitor.
Note
Step 3
Start Manycam/Splitcam/WebcamMax
Note
Step 4
Have Manycam/ Splitcam/Webcam Max grab the Desktop image
Note
HD-10 User Manual
During your initial NSN experience, you will find it difficult to even get the object of interest
onto the HD-10 Software window. Spend some time playing and adjusting the settings prior
to connecting to NSN. As you become more comfortable, you will find that you won't worry
about this step and will adjust the setting while connected to NSN (with the whole universe
watching you tweak it live).
Size the Manycam/Splitcam/WebcamMax window so that is beside the HD-10 Software
Window and you can see both with little overlap. If you have a dual monitor system you can
slide both the HD-10 Software Window and the Manycam/Splitcam/WebcamMax window to
the second monitor.
All of these packages have the ability to get a Desktop Image. Choose this option and overlay
the sizing window on top of your
the sizes until you obtain the ideal combination of both that fit in your screen. You want to
ensure that you get a good image of whatever the HD-10 Software is looking at inside the
Manycam/Splitcam/Webcam Max window.
HD-10 Software Image
July 7, 2017
Window. You may need to play with
Page 59