Using The Bodypack Transmitter; Switching The Bodypack Transmitter On/Off - Sennheiser Evolution Wireless SK 500 Instruction Manual

Using the bodypack transmitter

Using the bodypack transmitter
To establish a transmission link, proceed as follows:
1. Switch the receiver on (see the instruction manual of
the receiver).
2. Switch the bodypack transmitter on (see next section).
The transmission link is established and the display
backlighting of the receiver changes from red to orange.
It is vital to observe the notes on frequency
selection on page 28.
If you cannot establish a transmission link between body-
pack transmitter and receiver, refer to the chapter
"Synchronizing the bodypack transmitter with the receiver
– individual operation" on page 28.

Switching the bodypack transmitter on/off

Push the two battery compartment catches
the battery compartment cover
To switch the bodypack transmitter
Briefly press the
The bodypack transmitter transmits an RF
signal.
The
appears on the display panel. The red
lights up and the transmission icon
displayed.
You can switch the bodypack transmitter on and
deactivate the RF signal on switch-on. For more
information, see page 13.
12
ON/OFF
standard display
.
on (online operation):
button .
"Frequency/Name"
ON
and open
LED
is