Samsung WF-R1061 Service Manual page 67

39 DRUM 11E : front E9 Water leakage ERR
WASHER loading
(MODEL washing
NAME : machine
Q1*3*) error
40 DRUM door : front Ed:Door being not opened
WASHER loading
(MODEL washing
NAME : machine
Q1*3*) error
41 DRUM front E6:Overheating error
WASHER loading
(MODEL washing
NAME : machine
Q1*3*) error
42 DRUM water Cold water being not
WASHER supply supplied
(MODEL related
NAME :
Q1*3*)
43 DRUM water Water being supplied little
WASHER supply
(MODEL related
NAME :
Q1*3*)
44 DRUM water Detergent being remained
WASHER supply
(MODEL related
NAME :
Q1*3*)
45 DRUM water Water being stopped dur-
WASHER supply ing the coming in
(MODEL related
NAME :
Q1*3*)
46 DRUM water Clothes being damaged
WASHER supply
(MODEL related
NAME :
Q1*3*)
47 DRUM water One direction rotation
WASHER supply
(MODEL related
NAME :
Q1*3*)
48 DRUM water Rotation being not worked
WASHER supply after it sounds with buzz
(MODEL related
NAME :
Q1*3*)
49 DRUM water Water being not supplied
WASHER supply in winter
(MODEL related
NAME :
Q1*3*)
All manuals and user guides at all-guides.com
AS rerecom-
mended
AS rerecom-
mended
AS rerecom-
mended
General
consulting
General
consulting
General
consulting
General
consulting
General
consulting
64
Check In this case you are recommended our
whether there engineer's inspection.
is foreign ma-
terial inserted
in the drain
fi lter.
It may appear There is a cover dettachable at the front bottom.
when the the Pull out the cover to fi nd the handle to open at
door is opened the right side. Pull out the handle to open the
a certain door.
minutes after
the completion
of washing or
the electricity
is interrupted
in running.
Check of Bad
contact of 1st
door opening
sensor----
*check of
the bending
of 2nd door
switch*Do not
open the door
It may appear In this case you are recommended our
when the engineer's inspection.
temperarture
rises rapidly.
Check fi rst whether the water supply is cut
and also check whether the foreign material is
inserted. If the foreign material is inserted turn
the connection hose of machine to the left to
disconnect and to fi nd the strainer to trap the
foreign material.
It may appear Is it checked whether the tap is fully open or
when the tap there is a foreign material inserted? First check
is not opened whether the tap is fully open. And there is no
properly or fault turn the hose of the machine to the left to
there is a for- take out strainer in the hole of water entrance.
eign material Clean i
inside.
It may appear Sove the detergent wth the hot water and put it
when the long- inot the washing box.
term used If it is not solved even with the normal detergent
detergent is request an engineer's inspection.
not well sol-
uted or when
the water
temperature
is low during
winter.
It may appear Is it checked whether the water is cut or there is
when the a foreign material inserted in the water supply
water is cut hole? First check whether the water is cut and
or the water if there is a blackout push the power button on.
supply hole is Otherwise turn the machine hose to the left to
clogged. take out t
In this case you are recommended our
engineer's inspection.
In this case you are recommended our
engineer's inspection.
In this case you are recommended our
engineer's inspection.
It may appear Make the water supply hole warm and defreeze
when the tap it with wet towel.
and the water
supply hose
are frozen if it
is used at the
veranda in the
winter.