Show Rds Information; Other Features; Set Sleep Timer; Set Alarm Timer - Philips DCM2020 User Manual

Show RDS information

5'6 5DGLR 'DWD 6\VWHP LV D VHUYLFH
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
Tune to an RDS station.
2
Press RDS repeatedly to scroll through the
IROORZLQJ LQIRUPDWLRQ LI DYDLODEOH
» Station name
» Program type such as [NEWS] QHZV 
[SPORT] VSRUW  [POP M] (pop
PXVLF 
» RDS clock
» )UHTXHQF\
Synchronize time with RDS
You can synchronize time shown on the unit
with that on the RDS station.
1
Tune to a RDS radio station that transmits
time signals.
2
Press RDS for over 2 seconds.
» [CT SYNC] is displayed and the unit
reads RDS time automatically.
» If no time signal is received, [NO CT]
is displayed.
Note
‡
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
18 EN
All manuals and user guides at all-guides.com

7 Other features

Set sleep timer

When the unit is turned on, press
SLEEP/TIMER repeatedly to select a time
SHULRG LQ PLQXWHV 
» When sleep timer is activated,
displayed.
‡ To deactivate sleep timer, press
SLEEP/TIMER again until

Set alarm timer

This unit can be used as an alarm clock. You can
select CD, iPod/iPhone/iPad, playlist, FM, or USB
as alarm source.
Note
‡
Make sure that you have set the time correctly.
1
In standby mode, press and hold
SLEEP/TIMER until [TIMER SET] scrolls on
the display.
» [SELECT SOURCE] scrolls on the
screen.
2
Press SOURCE repeatedly to select a
source: DISC, USB, TUNER, iPod/iPhone/
iPad, or playlist.
‡ If iPod/iPhone/iPad playlist is selected
as the alarm source, you need create
a playlist called "PHILIPS" in your iPod/
iPhone/iPad.
‡ If no playlist called "PHILIPS" is created
in the iPod/iPhone/iPad or no track is
stored in the playlist, the unit switches
to TUNER alarm source.
is
disappears.