Get Started; Connect Speakers; Connect Fm Aerial; Connect Power - Philips DCM2020 User Manual

3 Get started

Caution
‡
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
VHTXHQFH
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. ______________________________
Serial No. _______________________________

Connect speakers

Note
‡
For optimal sound, use the supplied speakers only.
‡
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
6SHFLÀFDWLRQV VHFWLRQ RI WKLV PDQXDO
Insert the speaker wires completely into the
speaker input sockets on the back of the unit.
All manuals and user guides at all-guides.com

Connect FM aerial

Tip
‡
For optimal reception, fully extend and adjust the
position of the antenna.
‡
For better FM stereo reception, connect an outdoor
FM antenna to the FM AERIAL socket.
‡
The unit does not support MW radio reception.
Connect the supplied FM antenna to the FM
AERIAL socket on the back of the unit.

Connect power

Caution
‡
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
‡
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
‡
Before you connect the AC power cord, ensure that
you have completed all other connections.
FM
EN 11