Program Radio Stations Manually; Tune To A Preset Radio Station; Show Rds Information - Philips DCM2020 User Instruction

Program radio stations
manually
Note
‡
You can program a maximum of 20 preset radio
stations.
1
Tune to a radio station.
2
Press PROG/CLOCK SETto activate
programming mode.
3
Press / to select a number from
1–20 for this radio station, then press
PROG/CLOCK SET WR FRQÀUP
» The preset number and the frequency
of the preset station are displayed.
4
Repeat steps 2-3 to program other
stations.
Note
‡
To overwrite a programmed station, store another
station in its place.

Tune to a preset radio station

1
Press / to select a preset number.

Show RDS information

5'6 5DGLR 'DWD 6\VWHP LV D VHUYLFH
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
Tune to an RDS station.
16 EN
2
Press RDS repeatedly to scroll through the
IROORZLQJ LQIRUPDWLRQ LI DYDLODEOH
» Station name
» Program type such as [NEWS] QHZV 
[SPORT] VSRUW  [POP M] (pop
PXVLF 
» RDS clock
» Frequency
Synchronize clock with RDS
You can synchronize time shown on the unit
with that on the RDS station.
1
Tune to a RDS radio station that transmits
time signals.
2
Press RDS for over 2 seconds.
» [CT SYNC] is displayed and the unit
reads RDS time automatically.
» If no time signal is received, [NO CT]
is displayed.
Note
‡
The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.