Bosch FL12 Operating/Safety Instructions Manual page 8

BM 2610034967 04-14_FL12 4/17/14 9:38 AM Page 8
WORKING ADVICE
The cordless worklight runs at reduced
brightness when the battery capacity is at
approx. 1.3 %. The cordless worklight flashes
3 times before the brightness decreases.
Swivelling the Lamp head (figure 3)
The lamp head can be swiveled up to 200° to
suit the application.
– As an uplight with the lamp head aimed
upwards.
– Swiveled 90° to shine light into the room.
– With lamp head tilted approx. 120° for
glare-free lighting of the work area, e.g.a
desk.
– With lamp head tilted approx. 200° to
illuminate the floor.
Note: At a tilt of more than 90° the cordless
worklight has to be fixed.
Utility hook (figure 4)
You can use the utility hook to attach the
cordless worklight to an object.
Carabiner (figure 5)
You can use the carabiner to attach the
cordless worklight e. g. to a rope or belt.
Magnetic Mount (figure 6)
You can use the magnetic mount 6 to attach
the cordless worklight to ferrous surfaces. Do
so carefully in order to avoid scratching
delicate surfaces.
Tripod Mount (1/4") (figure 7)
You can use the tripod mount to screw the
cordless worklight onto a tripod.
FIG. 3
180˚
200˚
FIG. 4
FIG. 5
FIG. 6
FIG. 7
-8-
30˚
0˚
C R BINER
TRIPOD
MOUNT
1/4"