11
Connect the antenna cables to the system board.
The following table provides the antenna cable color schemes for the wireless card supported by your computer.
Table 3. Antenna-cable color scheme
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
Post-requisites
1
Replace the fans.
2
Replace the
heat
sink.
3
Replace the
solid-state
4
Replace the battery.
5
Replace the
base
cover.
Entering the Service Tag in the BIOS setup program
1
Turn on or restart your computer.
2
Press F2 when the Dell logo is displayed to enter the BIOS setup program.
3
Navigate to the Main tab and enter the Service Tag in the Service Tag Input field.
NOTE:
Service tag is the alphanumeric identifier located at the back side of your computer.
drive.
Antenna-cable color
White
Black
Replacing the system board
47