Replacing The Display Assembly; Procedure - Dell XPS 9380 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Slide the palm-rest assembly under the hinges of the display assembly.
2 Using the alignment posts, press the display hinges down on the palm-rest assembly, aligning the screw holes on the display hinges
with the screw holes on the palm-rest assembly.
3 Connect the antenna cables to the system board.
The following table provides the antenna cable color schemes for the wireless card supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
34

Replacing the display assembly

Replacing the display assembly
computer. After working inside your computer, follow the instructions in
www.dell.com/
Antenna-cable color
White
Black
19
After working inside