Beef Eater DISCOVERY 1100 SERIES Assembly And Operating Instructions page 2

Contents
QTY DESCRIPTION
1 Front Cover
1+1 RH Bracket + LH Bracket
1 Back Cover
Instructions
NOTE: the full Barbecue assembly instructions can be found
in the Barbecue Carton. These instructions only refer to
placement of Trims in Built-In situations.
1) Attach the RH Bracket and LH Bracket to Barbecue
body using 8 off M6 x 12mm screws as follows:
NOTE: Washers are to be placed between the Barbecue
body and the bracket.
2) Place BBQ into its position in the bench, resting on the
brackets installed in (1).
3) Attach the rear trim to place:
© 2017 Electrolux Home Products Pty Ltd.
ABN 51 004 762 341
BMAN_DisTrimKit_Jul17
QTY DESCRIPTION
10 M6 x 12mm Screws
10 M6 Fiber Washers
4) The front cover can be removed for accessing the Fat-
Collecting Pan and replaced:
AUSTRALIA
phone: 1300 307 939
fax: 1800 356 669
email: customercare@electrolux.com.au
web: beefeaterbbq.com
NEW ZEALAND
phone: 0800 436 245
fax: 0800 225 088
email: customercare@electrolux.co.nz
web: beefeaterbbq.com