Controls And Functions - Orion 5Q740 User Manual

CONTROLS AND FUNCTIONS

B.DEGAUSS BUTTON
C.SELECT BUTTON
D. ADJUST BUTTONS
(DOWN & UP)
A. POWER SWITCH(
Turns the power ON or OFF. There will be a few seconds delay before
the display appears.
The power LED(next to the power switch) lights when the power
is turned ON.
The power is turned off by pressing the power switch again and
the power LED goes out.
B. DEGAUSS BUTTON
If the CRT of the monitor becomes magnetized, Picture color is not clean and
may be in different light and darkness.
If you push the DEGAUSS botton when OSD menu is not shown, you can get
the clean picture and uniformity color.
But, if you push the DEGAUSS button when OSD menu is shown, you make
OSD menu disappeared.
In addition, you can use this button to return to the previous menu after adjustment.
NOTE
- The CRT is degaussed automatically each time the monitor is turned on.
- When the button is pushed, the picture will be oscillate for a few seconds.
- Pressing more than once has on effect.
If you want to demagnetize again, push after at least 30 minutes.
)
POWER INDICATOR(LED)
A. POWER SWITCH