How To Operate; Read Before Using; Key Layout - Sharp EL-W535TG Operation Manual

Read Before Using

This operation guide has been written mainly based on the EL-W535TG model.
And some functions described here are featured on the EL-W516T model only.
Note that key operations and symbols on the display may differ according to the model.

1. KEY LAYOUT

2nd function, ALPHA keys
Pressing these keys will enable
the functions written in orange
(2nd F) or green (ALPHA) above
the calculator buttons.
ON/C, OFF key
<Power on>
<Power off>
Written in orange
above the ON/C key
HOME key
Pressing this key will return to
NORMAL mode.
NOTE:
The EL-W516T model has another modes (Complex, Equation, Matrix, Vector and
Distribution modes).

How to Operate

(EL-W535TG)
Mode key
This calculator can operate in four different modes as follows.
[NORMAL mode] •Mode = 0; normal mode for
performing normal
arithmetic and function
calculations.
[STAT mode] •Mode = 1; mode for
performing 1- or 2-variable
statistical calculations. To
select the sub-mode, press
the corresponding number
key after
Single variable statistic calculation
Linear regression calculation
Quadratic regression calculation
Euler Exponential regression calculation
Logarithmic regression calculation
Power regression calculation
Inverse regression calculation
Exponential regression calculation
•Mode = 2; mode for
[TABLE mode]
showing the changes in
values of a function in table
format.
[DRILL mode] •Mode = 3; mode for
performing drill calculations.
To select the drill sub-mode,
press the corresponding
number key after
(MATH): Math drill
(TABLE): Multiplication table drill
4
.
.