GoWISE USA GW22041 Instruction Manual page 20

LOW BATTERY INDICATION. When "Lo" is shown, the
scale will turn off after a few seconds and please change
the batteries.
OVERLOAD INDICATION. Remove the weight on the scale
to protect the load cells.
MEASURING ERROR INDICATION. The weight data will
show only and the scale will turn off after a few seconds.
Make sure that you are standing on the scale bare foot.
FAILED IDENTITY INDICATION. The weight is shown only
once and the scale turns off after a few seconds. Select
your user number and try measuring again
Reminder
a.) Please do not put the scale on carpet.
b.) If the scale is not used for an extended period, please remove
the batteries.
c.) Clean the scale with a slightly damp cloth, DO NOT immerse the
scale in water or use chemical/abrasive cleaning agents.
d.) To ensure the most accurate weighing, when you move the
scale, please first turn on(or tap on) and wait for it turns off
before measuring your weight. Otherwise, the scale will add its
own weight.
Indication Message
20