Powering The Pilot Controller On - Raymarine p70 Quick Reference

p70r rotary pilot controller
1
Item
1.
2.
3.
4
Description
LEFT SOFT BUTTON
Cancel, Back, mode selection.
STANDBY BUTTON
Disengage pilot, Manual control,
Power, Brightness.
ROTARY CLOCKWISE
Down navigation in list, Adjust Up,
Increase angle (locked heading),
adjust numerical values, power steer.
Item
4.
5.
6.
7.
The pilot controller supports the following combination button
presses:
Combination button press
Buttons
STANDBY and AUTO.
D12109-1
–1 and –10
or
+1 and +10.

Powering the pilot controller on

1. Press and hold the STANDBY button for 1 second, until the
Raymarine logo appears.
The pilot controller will load to the mode page.
Description
ROTARY ANTI-CLOCKWISE
Up navigation in list, Adjust Down,
Decrease angle (locked heading),
adjust numerical values, power steer.
RIGHT SOFT BUTTON
Menu, Select, OK, Save.
AUTO BUTTON
Engage Auto pilot.
ROTARY END PUSH BUTTON
Menu, Select, OK, Save.
Action
Puts pilot in to Wind Vane mode.
AutoTack (in wind vane mode),
AutoTurn
p70 / p70r Pilot controller Quick reference