Table of Contents
Advertisement
Quick Links
INSTALLATION AND
OWNER'S INSTRUCTIONS
Extreme Series
Adjustable Height
Goal System
TABLE OF CONTENTS
Safety Instructions ............................................... 2
Goal Specifications .............................................. 3
Determine Installation Specifications ................... 3
Ground Anchor Installation .................................. 4
Pole Assembly ..................................................... 5
Extension Arm Attachments ................................. 6
Jack Attachment .................................................. 7
Backboard Attachment ......................................... 8
Goal Alignment .................................................... 9
Rim Attachment ................................................. 10
Height Indicator Adjustment .............................. 11
Ready to Play ..................................................... 12
Warranties.......................................................... 13
Advertisement
Table of Contents
Related Manuals for Goalsetter Systems Extreme Series
Summary of Contents for Goalsetter Systems Extreme Series
-
Page 1: Table Of Contents
INSTALLATION AND OWNER’S INSTRUCTIONS Extreme Series Adjustable Height Goal System TABLE OF CONTENTS Safety Instructions ..........2 Goal Specifications ..........3 Determine Installation Specifications ....3 Ground Anchor Installation ........4 Pole Assembly ............. 5 Extension Arm Attachments ......... 6 Jack Attachment .......... -
Page 2: Safety Instructions
Your goal may have product improvements and options not yet contained in this manual. Goalsetter Systems, Inc. reserves the right to make changes at any DO NOT CLIMB THE POLE OR HANG on the rim or any part of time without notice or obligation. -
Page 3: Goal Specifications
Goal Specifications Pole Size: Backboard Size: Weight w/Acrylic: 260 lbs. 255 lbs. Weight w/Glass: 300 lbs. 285 lbs. Determine Installation Location Consider the following to determine where to install your Goalsetter Basketball Goal: lines? (No overhead power lines should be within a 20 ft. ®... -
Page 4: Ground Anchor Installation
Ground Anchor Installation Step 1: Locate and unpack a 4” ground anchor TIME OUT TIP: The arrow on the decal (Item G2440). Remove plastic plugs from bolt holes and MUST be pointing toward the playing surface. ensure the threads are in good condition. REPLACE THE PLUGS –... -
Page 5: Pole Assembly
Pole Assembly Step 2: Unpack pole and jack. Jack comes packaged with the pole. Jack will be used in Jack Attachment instructions. IMPORTANT Step 3: Align pole hinge with anchor plate hinge, then insert hinge pin and hand tighten hex nut. ground anchor bolt holes by threading anchor bolts in and out. -
Page 6: Extension Arm Attachments
Extension Arm Attachments Step 3: Attach upper extension arm pivot holes WARNING with upper holes in pole following the same hardware and Two or three people in good physical condition and capable of procedure as in Step 2. lifting at least 90-100 lbs. (40-45 kg) each are recommended for safe installation and assembly. -
Page 7: Jack Attachment
Jack Attachment WARNING Step 3: Extend jack by turning jack handle counter- Two or three people in good physical condition and capable of clockwise until upper jack bracket is aligned with holes in lower lifting at least 90-100 lbs. (40-45 kg) each are recommended extension arm. -
Page 8: Backboard Attachment
Backboard Attachment Step 2: Carefully lift the bottom of the backboard to WARNING align lower backboard holes with lower extension arm Two or three people in good physical condition and capable of holes. Using ratchet and wrench, attach backboard to arm using lifting at least 90-100 lbs. -
Page 9: Goal Alignment
Goal Alignment Step 4: Fasten pole to threaded ground anchor plate WARNING! by installing and hand tightening the three rear anchor bolts with For safe assembly, do the following: lock washers. a vertical position. Two or three people in good physical con- Step 5: Fasten pole to threaded ground anchor plate dition and capable of lifting at least 90-100 lbs. -
Page 10: Rim Attachment
Rim Attachment Step 2: If not already removed, remove cover plate NOTE: Use all steps of the following instructions to install a reflex rim. To install a static rim, follow all steps except Steps 2 and 6. screws and cover plate from rim assembly. Step 3: Starting with the top two mounting holes, TIME OUT TIP: Your warranty card is located... -
Page 11: Height Indicator Adjustment
Height Indicator Attachment Step 1: Position top of rim crank handle. Step 2: Measure distance with a tape measure for accuracy. Draw a mark on inner tube at edge of outer jack tube. mark). Slip decal under the outer tube on the drawn mark. -
Page 12: Ready To Play
DO NOT ALLOW PLAY ON THE GOAL AND REPLACE PARTS IMMEDIATELY. use parts provided by Goalsetter Systems, Inc. Use of other parts (a) may cause the goal system to fail, (b) could result in death, serious injury or property damage, and (c) will void the warranty. -
Page 13: Warranties
Goalsetter Systems, Inc. to be defective and covered by the warranty. Goalsetter Systems, Inc. will not be two (2) years from date of purchase. liable for any other damages or expenses. The applicable warranty is expressly in lieu of all other warranties, express or implied. - Page 14 Goalsetter Systems, Inc. needs your warranty item returned. Goalsetter Systems, Inc. will notify you by fax or phone if we determine that the item cannot be claimed under warranty. Goalsetter Systems, Inc.
- Page 15 This page intentionally left blank.
- Page 16 Email:info@goalsetter.com www.goalsetter.com Revised 1/2015...
Need help?
Do you have a question about the Extreme Series and is the answer not in the manual?
Questions and answers