Software - Behringer ULTRA-CURVE PRO DSP8024 User Manual

Status Bytes
Program Changes
Controller
Data Bytes
Contrl.
Parameter
Number
0-30
31
Master Level Left
32-62
EQ Right
63
Master Level Right
* You can adjust an offset for the MIDI controller. The MIDI controller will start from the chosen position.

7.4 Software

The ULTRA-CURVE PRO operating software is under continuous development to improve its performance and
control, and to keep pace with your expectations and requirements. Therefore you are asked to contact us with
your needs, suggestions and ideas. We will make every effort to put your ideas into use in successive software
updates. In order to receive a new software update, you must send your ULTRA-CURVE PRO to us. Information
about new software versions will be available through music magazines, from your dealer or directly from
BEHRINGER (+49 2154 920666).
+
The current software version will always be displayed shortly after switching the
ULTRA-CURVE PRO on.
ULTRA-CURVE PRO DSP8024
Controller Offset adjustable from 0 to 64 *
20 Hz, 25 Hz, ..., 16 kHz, 20 kHz
EQ Left
20 Hz, 25 Hz, ..., 16 kHz, 20 kHz
Tab. 7.2: MIDI controller
7. APPENDIX
Pcxx c = Channel
xx = Program (0..99)
Ccxx c = Channel
xx = Number
Definition
Range
0 - 127
0 - 127
0 - 127
0 - 127
33